User Manual
DISPLAYS LIMITED
5
Warranty and Support Services
Technical Support
Should you require technical assistance, please contact ZBD Displays Limited.
Tel. +44 (0)1344 887 685 Fax. +44 (0)1344 887 601
Email: support@zbd.co.uk
Web: www.zbd.co.uk
Return Merchandise Authorization
Please contact our support center for an RMA number before sending your product to the repair address. Product sent to
the repair address without an RMA number will be returned unopened.
In Europe: ZBD Displays Limited, Orchard Lea. Winkfield Lane, Windsor, Berkshire, SL4 4RU, England
Tel. +44 (0)1344 887 685 Fax. +44 (0)1344 887 601
Email: support@zbd.co.uk
Web: www.zbd.co.uk
One Year Limited Warranty
• This device is guaranteed against manufacturing defects for One full year from the original date of
purchase.
• This warranty is valid at the time of purchase and is non-transfer able.
• This warranty must be presented to the service facility before any repair can be made.
• Sales slip or other authentic evidence is required to validate warranty.
• This product should be installed and used in accordance with the instructions detailed in this user guide
and serviced at an approved ZBD Displays Service Centre. Failure to comply with these conditions may
render the warranty void.
• Damage caused by accident, misuse, abuse, improper storage, and/or uncertified repairs is not covered
by this warranty.
• All mail or transportation costs including insurance are at the expense of the owner.
• Do not send any product to service center for warranty without a RMA
• (Return Merchandise Authorization) and proof of purchase. Ensure a track able method of delivery is
used (keep tracking number).
• Warranty is valid only in the country of purchase.
• We assume no liability that may result directly or indirectly from the use or misuse of these products.
• “This warranty will be voided if the device is tampered with or improperly serviced"
WEEE Statement (Waste, Electrical and Electronic Equipment)
The WEEE directive places an obligation on all EU-based manufacturers and importers to take-back
electronic products at the end of their useful life.
ZBD Displays Limited accepts its responsibility to finance the cost of treatment and recovery of
redundant WEEE in accordance with the specific WEEE recycling requirements.
The symbol (shown) will be on ZBD Displays products and packaging from 1
st
July 2006, which indicates that this
product must NOT be disposed of with other waste. Instead it is the user’s responsibility to dispose of their waste
electrical and electronic equipment by handing it over to an approved reprocessor, or by returning it to ZBD Displays for
reprocessing. For more information about where you can send your waste equipment for recycling, please contact your
local city office or ZBD Displays support offices.
ZBD Displays has applied to become a member of a compliance scheme. Our Producer Registration Number has been
filed and we are waiting for a registration number.
The regulations are due to commence July 2007, as we have more information we will update this data.
RoHS - Restriction of Hazardous Substances
ZBD Displays is fully aware of the new legislation and has taken steps to ensure
that all products are RoHS Compliant and as a "Producer" of product ensures that
we meet the new regulations.