Datasheet

DEP 256064C-Y Production Specification
Version: 3 PAGE: 7
These pins are 8-bit bi-directional data bus to be connected to
the microprocessor’s data bus. When serial mode is selected,
D1 will be the serial data input SDIN and D0 will be the serial
clock input SCLK.
Unused pins must be connected to VSS except for D2 in serial
mode.
Reserve
23
N.C.
-
Reserved Pin
The N.C. pin between function pins are reserved for compatible
and flexible design.
1,30
N.C.
(GND)
-
Reserved Pin (Supporting Pin)
The supporting pins can reduce the influences from stresses
on the function pins. These pins must be connected to external
ground.