Datasheet

DEP 128064M1-W Production Specification
Version: 0 PAGE: 6
to VSS.
16 RES#
This pin is reset signal input.
When the pin is pulled LOW, initialization of the chip is executed.
Keep this pin pull HIGH during normal operation.
17 CS#
This pin is the chip select input connecting to the MCU.
The chip is enabled for MCU
communication only when CS# is pulled
LOW (active LOW).
18 NC No connection
19 BS2
MCU bus interface selection pins. Select appropriate logic setting as
described in the following table. BS2, BS1 and BS0 are pin select
Note
(1) 0 is connected to VSS
(2) 1 is connected to VDD
20 BS1
21 VDD Power supply pin for core logic operation
22~28 NC No connection
29 VSS Ground.
30 NC No connection