Datasheet

DEM 240320J1 TMH-PW-N Production Specification
Version: 4 PAGE: 4
1. General Description
The specification is a transmissive type color active matrix liquid crystal display (LCD) which uses
amorphous thin film transistor (TFT) as switching devices. This product is composed of a TFT-LCD
panel, driver ICs and a backlight unit.
2. Module Parameter
Features Details Unit
Display Size (Diagonal) 2.4” -
LCD Type TN TFT -
Display Mode Transmissive / Normally White -
Resolution 240 x RGB x 320 Pixels
View Direction 6 O’clock Best Image
Gray Scale Inversion Direction 12 O’clock -
Module Outline 42.72 x 60.26 x 2.65 (Note1 ) mm
Active Area 36.72 x 48.96 mm
Pixel Size 0.153 x 0.153 mm
Pixel Arrangement Stripe -
Polarizer Surface Treatment Anti-Glare -
Display Colors 262k -
Interface
16/8 Bit Parallel Interface
3/4 Wire Serial Interface
-
With or without touch panel Without -
Driver IC ST7789V (Sitronix) -
Operating Temperature -20 to 70 ºC
Storage Temperature -30 to 80 ºC
Weight 10 g
Note 1: Exclusive hooks, posts, FFC/FPC tail etc.
3. Absolute Maximum Ratings
V
SS
=0V, Ta=25ºC
Item Symbol Min. Max. Unit
Supply Voltage
VCC -0.3 4.6 V
VCI -0.3 4.6 V
Storage Temperature
T
STG
-30 +80 ºC
Operating Temperature
T
OP
-20 +70 ºC
Note 1: If Ta below 50ºC, the maximal humidity is 90%RH, if Ta over 50ºC, absolute humidity should be
less than 60%RH.
Note 2: The response time will be extremely slow when the operating temperature is around -10°C, and
the back ground will become darker at high temperature operating.