Datasheet

DEM 240320J1 TMH-PW-N Production Specification
Version: 4 PAGE: 16
10. Quality Assurance
10.1. Purpose
This standard for Quality Assurance assures the quality of LCD module products supplied to
customer.
10.2. Standard for Quality Test
10.2.1. Sampling Plan:
GB2828.1-2012
Single sampling, general inspection level II
10.2.2. Sampling Criteria:
Visual inspection: AQL 1.5%
Electrical functional: AQL 0.65%.
10.2.3. Reliability Test:
Detailed requirement refer to Reliability Test Specification.
10.3. Nonconforming Analysis & Disposition
10.3.1. Nonconforming analysis:
10.3.1.1. Customer should provide overall information of non-conforming sample for
their complaints.
10.3.1.2. After receipt of detailed information from customer, the analysis of
nonconforming parts usually should be finished in one week.
10.3.1.3. If cannot finish the analysis on time, customer will be notified with the
progress status.
10.3.2. Disposition of nonconforming:
10.3.2.1. Non-conforming product over PPM level will be replaced.
10.3.2.2. The cause of non-conformance will be analyzed. Corrective action will be
discussed and implemented.
10.4. Agreement Items
Shall negotiate with customer if the following situation occurs:
10.4.1. There is any discrepancy in standard of quality assurance.
10.4.2. Additional requirement to be added in product specification.
10.4.3. Any other special problem.