Datasheet

DEM 20486 SYH-LY Product Specification

Version: 1 PAGE: 5

Description :

6-1-1.The polarity of the pin 15 and the pin 16

LED Polarity

J3,J5 J2, J4

15 Pin 16 Pin

Each open Each closed Anode Cathode

Each closed Each open Cathode Anode

Note: on application module, J3=J5= 0 Ohm, J2=J4= open

6-1-2. The metal-bezel is set on ground when the J1 = 0 Ohm.

Note: on application module, J1= 0 Ohm

6-1-3.The LED resistor should can be bridged when the J6 is open.

Note: on application module, J6=open

6-1-4.The R7 and the R8 are the LED resistor.

Note: on application module, R7= R8=10Ω.

6.2 Example application

6-2-1. The LED resistor should be bridged as following.

6-2-2. The 15 pin is the anode and the 16 pin is the cathode as following.

6-2-3.The 15 pin is the cathode and the 16 pin is the anode as following.

6-2-4. The metal-bezel is on ground as following.