Datasheet

DEM 16215 SBH-PW-N Product specification
16. LCD Modules Handling precautions
The display panel is made of glass. Do not subject it to a mechanical shock by dropping
it from a high place ,etc.
If the display panel is damaged and the liquid crystal substance inside it leaks out , do
not get any in your mouth . If the substance come into contact with your skin or clothes
promptly wash it off using soap and water.
Do not apply excessive force to the display surface or the adjoining areas since this may
cause the color tone to vary.
The polarizer covering the display surface of the LCD module is soft and easily scratched.
handle this polarize carefully
To prevent destruction of the elements by static electricity , be careful to maintain an
optimum work environment.
-Be sure to ground the body when handling the LCD Modules.
-Tools required for assembly, such as soldering irons, must be properly grounded.
-To reduce the amount of static electricity generated, do not conduct assembly and other
work under dry conditions.
-The
LCD
Module is coated with a film to protect the display surface. Exercise care when
peeling off this protective film since static electricity may be generated.
Storage Precautions
When storing the LCD Modules, avoid exposure to direct sunlight or to the light of
fluorescent lamps. Keep the modules in bags designed to prevent static electricity
charging under low temperature / normal humidity conditions ( avoid high temperature /
high humidity and low temperatures below
0°C
).Whenever possible, the
LCD
Modules
should be stored in the same conditions in which they were shipped from our company.
VERSION : 3 PAGE: 20