Datasheet

ManualsBrandsDisplay Elektronik ManualsActive ComponentsLCD 16 x 2 Pixel (W x H x D) 80 x 36 x 6.6 mm

09/Apr/2009

DISPLAY Elektronik GmbH

DEM 16213 SYH

LCD MODULE

Product Specification

Version : 1.1.1

Summary of content (14 pages)

PAGE 1
DISPLAY Elektronik GmbH LCD MODULE DEM 16213 SYH Product Specification Version : 1.1.
PAGE 2
GENERAL SPECIFICATION MODULE NO. : DEM 16213 SYH CUSTOMER P/N Version No. Change Description Date 0 ORIGINAL VERSION 08.03.2001 1 PCB CHANGED 04.04.2003 1.1.0 CHANGE IC 04.01.2008 1.1.1 IMPROVE DRAWING 09.04.2009 PREPARED BY: HCL APPROVED BY: MH DATE: 09.04.2009 DATE: 09.04.
PAGE 3
DEM 16213 SYH Product Specification CONTENTS 1.FUNCTIONS & FEATURES ..........................................................................................................................2 2. MECHANICAL SPECIFICATIONS.............................................................................................................2 3. EXTERNAL DIMENSIONS...........................................................................................................................3 4. BLOCK DIAGRAM ...............
PAGE 4
DEM 16213 SYH Product Specification 1. FUNCTIONS & FEATURES MODULE NAME LCD Type DEM 16213 SYH STN Yellow-Green Reflective Positive Mode z Viewing Direction : 6 o’clock z Driving Scheme : 1/16 Duty Cycle, 1/5 Bias z Power Supply Voltage : 5.0 Volt (typ.) z VLCD Adjustable For Best Contrast : 4.5 Volt (typ.
PAGE 5
DEM 16213 SYH Product Specification 3. EXTERNAL DIMENSIONS Version: 1.1.
PAGE 6
DEM 16213 SYH Product Specification 4. BLOCK DIAGRAM VSS VDD V0 RS R/ W E DB0~DB7 COM1~16 LCD PANEL 2Li neX16Char act er s SEG41~80 ST7066U-0A SEG0~40 ST7065C 5. PIN ASSIGNMENT Pin No. 1 2 3 Symbol VSS VDD V0 4 RS 5 R/W 6 7 8 9 10 11 12 13 14 15 16 E DB0 DB1 DB2 DB3 DB4 DB5 DB6 DB7 NC NC Version: 1.1.1 Function Ground terminal of module. Supply terminal of module 5.0V. Power Supply for liquid crystal drive.
PAGE 7
DEM 16213 SYH Product Specification 6.1 PCB DRAWING AND DESCRIPTION DESCRIPTION: 6-1-1.The polarity of the pin 15and the pin 16: Note: In application module, J2=J3=J4=J5=open. 6-1-2. The J1 is metal-bezel GND to module GND and J6 is mounting holes GND to module GND. Note: In application module, J1= J6=0 ohm. 6.2 Example application 6-2-1. The metal-bezel is on ground as following. J1 6-2-2. The mounting hole is on ground as following. J6 7.
PAGE 8
DEM 16213 SYH Product Specification 8. ELECTRICAL CHARACTERISTICS 8-1 DC Characteristics (VDD=5V,Ta=25°C) Item Symbol Operating Voltage VDD Standard Value Min Typ Max 4.7 5.0 5.3 IDD1 ---- TBD 1.0 Supply Current LCD Driving Voltage IDD2 ---- TBD 0.6 VLCD 4.2 4.5 4.8 Test Condition Unit ------- V Ceramic oscillation fosc=250kHz Resistor oscillation external clock operation fosc=270kHz VDD-V0 mA V 8-2 AC Characteristics Version: 1.1.
PAGE 9
DEM 16213 SYH Product Specification 9. DISPLAY DATA RAM (DDRAM) Version: 1.1.
PAGE 10
DEM 16213 SYH Product Specification 10. INSTRUCTION TABLE Version: 1.1.
PAGE 11
DEM 16213 SYH Product Specification 11. INITIALIZING BY INSTRUCTION 11-1. 8-bit interface mode (fosc=270 kHz) Version: 1.1.
PAGE 12
DEM 16213 SYH Product Specification 11-2. 4-bit interface mode Version: 1.1.
PAGE 13
DEM 16213 SYH Product Specification 12. CHARACTER GENERATOR ROM (ST7066-0A) Version: 1.1.
PAGE 14
DEM 16213 SYH Product Specification 13. LCD MODULES HANDLING PRECAUTIONS Please remove the protection foil of polarizer before using. The display panel is made of glass. Do not subject it to a mechanical shock by dropping it from a high place, etc. If the display panel is damaged and the liquid crystal substance inside it leaks out, do not get any in your mouth. If the substance come into contact with your skin or clothes promptly wash it off using soap and water.