Datasheet

ManualsBrandsDisplay Elektronik ManualsActive ComponentsLCD (W x H x D) 80 x 36 x 6.6 mm

23.09.2008

DISPLAY Elektronik GmbH

DEM 16101 TGH

LCD MODULE

Product Specification Version: 7.1.1

Summary of content (12 pages)

PAGE 1
DISPLAY Elektronik GmbH LCD MODULE DEM 16101 TGH Product Specification Version: 7.1.1 23.09.
PAGE 2
GENERAL SPECIFICATION MODULE NO. : DEM 16101 TGH VERSION NO. CHANGE DESCRIPTION DATE 0 ORIGINAL VERSION 06.03.2000 1 ADDING DDRAM ADDRESS 15.03.2001 2 LCD VERSION CHANGED 17.04.2001 3 ADD VERSION 22.09.2001 4 Vlcd AMENDMENT 05.10.2001 5 LCD VERSION CHANGED 20.04.2002 6 12.04.2005 7.1.0 ADD VERSION CHANGE NAME FROM DEM16101H > DEM16101TGH CHANGE IC 7.1.1 UPDATE PCB DESCRIPTION 17.09.2008 7 07.09.2006 12.11.2007 PREPARED BY: XYP DATE: 17.09.2008 APPROVED BY: MH DATE: 23.09.
PAGE 3
DEM 16101 TGH Product Specification CONTENTS 1. FUNCTIONS & FEATURES ..................................................................................................................................................2 2. MECHANICAL SPECIFICATIONS .....................................................................................................................................2 3. EXTERNAL DIMENSIONS ..........................................................................................................
PAGE 4
DEM 16101 TGH Product Specification 1. FUNCTIONS & FEATURES MODULE LCD TYPE DEM 16101 TGH TN Reflective Positive Mode z z Driving Scheme Power Supply Voltage : 1/16 Duty Cycle, 1/5 Bias : 5.0V (typ.) z z z VLCD Adjustable For Best Contrast(VDD-V0) Display contents Internal Memory z z z z CGROM Operating Temperature Storage Temperature Interface : 4.
PAGE 5
DEM 16101 TGH Product Specification 3. EXTERNAL DIMENSIONS 4. BLOCK DIAGRAM DB0~DB7 E R/W RS V0 VDD VSS Version: 7.1.
PAGE 6
DEM 16101 TGH Product Specification 5. PIN ASSIGNMENT Pin No. 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 Symbol VSS VDD V0 RS R/W E DB0 DB1 DB2 DB3 DB4 DB5 DB6 DB7 NC NC Function Ground Power supply (+5.0V) Power Supply for LCD Select Display Data ("H") or Instructions ("L") Read or Write Select Signal Read/Write Enable Signal Display Data Signal No connect. 6. PCB DRAWING AND DESCRIPTION 6.1 PCB DRAWING Note: The part no. DEM16101 and “UL” are printed on the PCB. Version: 7.1.
PAGE 7
DEM 16101 TGH Product Specification 6.2 DESCRIPTION: 6-2-1.The polarity of the pin 15 and the pin 16 J3,J5 J2, J4 Each open Each closed LED Polarity 15 Pin 16 Pin Each closed Anode Cathode Each open Cathode Anode Note: In application module, J2=J4=J3=J5= open. 6-2-2. The metal-bezel is set be on ground when the J1 is closed Note: In application module, J1=0 Ohm 6-2-3. The LED resistor on board are used when J6 is open Note: In application module, J6=open 6-2-4.
PAGE 8
DEM 16101 TGH Product Specification 9. ELECTRICAL CHARACTERISTICS 9-1 DC Characteristics(VDD=4.5V~5.5V,Ta=-20~+70°C) Item Symbol Standard Value MIN TYP MAX Test Condition Unit Operating Voltage VDD 4.5 5.0 5.5 ------- V LCD Driving Voltage VLCD 3.0 4.5 13.0 VDD-V0 V IDD ---- 0.35 0.6 VDD=5V,fosc=270kHz mA Supply Current 9-2 AC Characteristics (VDD=4.5V~5.
PAGE 9
DEM 16101 TGH Product Specification 9-2-2 Read Mode (Reading Data from module to MPU) Characteristic Symbol Min Type E Cycle Time tC 1200 --E Rise Time Max --- Unit ns Test PIN E --- --- 25 ns E E Fall Time tR tF --- --- 25 ns E E Pulse width tpW 140 --- --- ns E Address Setup Time tAS 0 --- --- ns R/W,RS,E Address Hold Time tAH 10 --- --- ns R/W,RS,E Data Setup Time tDDR --- --- ns DB0~DB7 Data Hold Time tH 10 --- 100 --- ns DB0~DB7 VIH1 RS V IL1 tAH
PAGE 10
DEM 16101 TGH Product Specification 10. CONTROL AND DISPLAY COMMAND Command RS Clear Display 0 R/W DB7 DB6 DB5 DB4 DB3 0 0 0 0 0 0 DB2 DB1 DB0 Execution time (fosc=270KHz) Remark 0 0 1 1.52ms Write”20H” to DDRAM. And set DDRAM address to “00H” from AC Return home 0 0 0 0 0 0 0 0 1 x 1.52ms Set DDRAM address to “00H” from AC and return cursor to its original position if shifted. The contents of DDRAM are not changed.
PAGE 11
DEM 16101 TGH Product Specification 11. STANDARD CHARACTER PATTERN (ST7066U-0A) Upper(4bit) Lowerr(4bit) 0000 0001 0010 0011 0100 0101 0110 0111 1000 1001 10010 1011 1100 1101 1110 1111 CG RAM 0000 (1) 0001 (2) 0010 (3) 0011 (4) 0100 (5) 0101 (6) 0110 (7) 0111 (8) 1000 (1) 1001 (2) 1010 (3) 1011 1100 1101 1110 1111 Version:7.1.
PAGE 12
DEM 16101 TGH Product Specification 12. LCD MODULES HANDLING PRECAUTIONS Please remove the protection foil of polarizer before using. The display panel is made of glass. Do not subject it to a mechanical shock by dropping it from a high place, etc. If the display panel is damaged and the liquid crystal substance inside it leaks out, do not get any in your mouth. If the substance comes into contact with your skin or clothes promptly wash it off using soap and water.