Datasheet

DEM 800480Q TMH-PW-N Production Specification
Version:
0
PAGE:
16
7. Reliability
Content of Reliability Test (Wide temperature, -20°C~70°C)
Note1: No dew condensation to be observed.
Note2: The function test shall be conducted after 4 hours storage at the normal
Temperature and humidity after remove from the test chamber.
Note3: The packing have to including into the vibration testing.
Environmental Test
Test Item
Content of Test
Test Condition
Note
High Temperature
storage
Endurance test applying the high storage temperature
for a long time.
80°C
200hrs
2
Low Temperature
storage
Endurance test applying the low storage temperature
for a long time.
-30°C
200hrs
1,2
High Temperature
Operation
Endurance test applying the electric stress (Voltage &
Current) and the thermal stress to the element for a
long time.
70°C
200hrs
——
Low Temperature
Operation
Endurance test applying the electric stress under low
temperature for a long time.
-20°C
200hrs
1
High Temperature/
Humidity Operation
The module should be allowed to stand at
60℃,90%RH max
60°C,90%RH
96hrs
1,2
Thermal shock
resistance
The sample should be allowed stand the following 10
cycles of
operation
-20°C 25°C 70°C
30min 5min 30min
1 cycle
-20°C/70°C
10 cycles
——
Vibration test Endurance test applying the vibration during
transportation and using.
Total fixed amplitude :
15mm
Vibration Frequency :
10~55Hz
One cycle 60
seconds to 3
directions of X,Y,Z for
Each 15 minutes
3
Static electricity test Endurance test applying the electric stress to the
terminal.
VS=800V,
RS=1.5kΩ
CS=100pF
1 time
——