DEM 640480D TMH-PW-N (C1-TOUCH) Production Specification Display Elektronik GmbH TFT MODULE DEM 640480D TMH-PW-N (C1-TOUCH) 5,7“ TFT + PCT Prod uc t Sp ec ifica tio n V e r.: 0 25.11.
DEM 640480D TMH-PW-N (C1-TOUCH) Revise Records Production Specification Rev. Date Contents Written Approved 0 25.11.2016 Preliminary Specification MH MH Special Notes Note1. Note2. Note3. Note4. Note5.
DEM 640480D TMH-PW-N (C1-TOUCH) Production Specification Contents 1. General Description and Features...............................................................................4 1.1 Features ......................................................................................................................... 4 1.2 LCD Module.................................................................................................................... 4 2. Mechanical Information.................................
DEM 640480D TMH-PW-N (C1-TOUCH) Production Specification 1. General Description and Features This 5,7” TFT is a transmissive type color active matrix TFT (Thin Film Transistor) liquid crystal display (LCD) that uses amorphous silicon TFT as a switching device. This model is composed of a TFT-LCD module, a driver circuit and a back-light unit. Graphics and texts can be displayed on a VGA 640 (W) x 3 x 480 (H) dots with 262,144 colors by supplying 18 bits data signal (6bits/each color).
DEM 640480D TMH-PW-N (C1-TOUCH) Production Specification 3. Electrical Specifications 3.1 Absolute Max. Ratings 3.1.1 Absolute Ratings of Environment If the operating condition exceeds the following absolute maximum ratings, the TFT LCD module may be damaged permanently. (Ta=25±2°C, VSS=GND=0) Item Symbol Min. Max. Unit Note Storage Temperature TSTG -30 80 °C (1) Operating Temperature TOPR -20 70 °C (1,2,3) Note (1) 95 % RH Max. (40°C ≥ Ta). Maximum wet-bulb temperature at 39°C or less.
DEM 640480D TMH-PW-N (C1-TOUCH) Production Specification 3.2 Electrical Characteristics 3.2.1 DC Electrical Characteristics of the TFT LCD (Ta=25±2°C, VSS=GND=0) Item Symbol Min. Typ. Max. Unit VCC 3.0 3.3 3.6 V H Level VIH 0.7VCC - VCC V L Level VIL 0 - 0.
DEM 640480D TMH-PW-N (C1-TOUCH) Production Specification 3.3 AC Timing Characteristic of The LCD 3.3.1 Timing Condition Parameter Symbol Min. Typ. Max. Unit. CLK frequency FCPH 22.66 25.175 27.69 MHZ CLK period TCPH 36.11 39.7 44.
DEM 640480D TMH-PW-N (C1-TOUCH) 3.3.2 Clock and Data input waveforms Production Specification 3.3.3 Parallel RGB SYNC Mode Horizontal Data Format 3.3.4 Parallel RGB DEN Mode Horizontal Data Format.
DEM 640480D TMH-PW-N (C1-TOUCH) Production Specification 3.3.5 LVDS Timing Condition 3.3.
DEM 640480D TMH-PW-N (C1-TOUCH) Production Specification 3.3.7 Backlight Unit The Backlight system is an edge-lighting type with 30 white LEDs(Light Emitting Diode). The characteristics of 30 white LEDs are shown in the following tables. (Ta= Room Temp) Characteristics Symbol Min. Typ. Max. Unit Note Current of Backlight Unit IB - 200 250 mA (1) Voltage of Backlight Unit VB - (9.6) (10.
DEM 640480D TMH-PW-N (C1-TOUCH) Production Specification 4. Optical Characteristics 4.1 Optical characteristic of the LCD The following items are measured under stable conditions. The optical characteristics should be measured in a dark room or equivalent state.
DEM 640480D TMH-PW-N (C1-TOUCH) c. Definition of contrast ratio: Production Specification Brightness measured when LCD is at “white state” Contrast Ratio (CR) = ¾¾¾¾¾¾¾¾¾¾¾¾¾¾¾¾¾¾¾¾¾¾¾¾¾¾¾Brightness measured when LCD is at “black state” d. Measured at the center area of the panel when all the input terminals of LCD panel are electrically opened. e. View Angle f. Definition of Luminance of White: Luminance of white at the center points Light Source of Back-Light Unit LED Type g.
DEM 640480D TMH-PW-N (C1-TOUCH) Production Specification 5. Input Terminal Pin Assignment 5.1 Pin Assignment Pin No. Symbol I/O 1 VCC P Power Supply 3.3V 2 VCC P Power Supply 3.
DEM 640480D TMH-PW-N (C1-TOUCH) 5.
DEM 640480D TMH-PW-N (C1-TOUCH) 5.
DEM 640480D TMH-PW-N (C1-TOUCH) Production Specification 6. Projected capacitive touch Screen Panel Specifications 6.1 Touch Panel Item Screen Size Type Input Mode Sensor Active Area Interface Cover Glass Pencil-Hardness Digital Power Supply Power Consumption IC solution 6.2 Specification Unit 5.7 Inches Transparent Type Projected Capacitive Touch Panel Human’s Finger 117.20 x 88.40 I2C 6H(min) by JIS K5400 2.8 ~ 3.6 TBD IC：ILI2117 Diagonal --mm --V mA Electrical Characteristics Item Symbol Min.
DEM 640480D TMH-PW-N (C1-TOUCH) Production Specification Pin Assignments and Definitions (Connector Part No: "FH34SJ-6S-1.0SH" or equivalent.) 6.3 Item 1 2 3 4 5 6 e Nam GN D SDA SCL VD D INT RST I/ O P I/ O I P I I Unit Ground I2C Data I2C Clock Power Interrupt request to the host External Reset, active low 6.4 FUNCTIONAL DESCRIPTION 6.4.1 AC Characteristics of the SDA and SCL on I2C interface 6.4.
DEM 640480D TMH-PW-N (C1-TOUCH) Production Specification 7. Reliability Condition No change on display and in operation under the following test condition. Condition: Unless otherwise specified, tests will be conducted under the following condition. Temperature: 20±5°C Humidity: 65±5%RH Tests will be not conducted under functioning state. No.
DEM 640480D TMH-PW-N (C1-TOUCH) Production Specification DETAIL "A" SCALE=50:1 8.
DEM 640480D TMH-PW-N (C1-TOUCH) Production Specification 9. Incoming Inspection Standards 9.1 Inspection and Environment Conditions 9.1.1 Inspection Conditions: (1)Inspection Distance: 35 cm±5cm (2)View Angle : Light-on Inspection Angle︰±5° Cosmetic Inspection Angle︰±45° Light-on Insp. Cosmetic Insp. 45° 30cm~40cm 5° 90° TFT-LCD ( perpendicular to LCD panel surface) 9.1.
DEM 640480D TMH-PW-N (C1-TOUCH) Production Specification 9.1.4 Inspection Criteria 9.1.4.1 Cosmetic Inspection(Panel): Item Judgment Criteria Chipping on Panel Classification MA a≦3.0mm、b≦3.0mm、c≦t ( Scratch on Panel *Note-2 Bubble or Dent on Panel *Note-3 Bottom glass thickness) W≦0.05mm or L< 5mm: Ignored 0.05mm0.1mm or L>5mm: Not allowed D≦0.2mm: Ignored 0.2mm0.
DEM 640480D TMH-PW-N (C1-TOUCH) Production Specification 9.1.4.
DEM 640480D TMH-PW-N (C1-TOUCH) Note-1︰ I/O Area Definition Production Specification Note-2︰ Polarizer Scratch L Note-3︰Spot Foreign Material (W ≧L / 4 ) W Note-4︰Line or Spiral Foreign Material (W
