Datasheet

DEM 40491 FGH-PW Product Specification
Version: 3 PAGE: 5
6. PCB DRAWING AND DESCRIPTION
DESCRIPTION:
6-1-1.The polarity of the pin 17 and the pin 18:
LED Polarity
J3,J5 J2, J4
17 Pin 18 Pin
open Each closed Anode Cathode
Each closed open Cathode Anode
Note: In application module, J2=J4= open and J3=J5=closed
6-1-2. The metal-bezel is set on ground when the J1 is closed
Note: In application module, J1=closed
6-1-3. The mounting-holes should be on ground when the J7 is close.
Note: In application module, J7=closed
6-1-4.The LED resistor should be bridged when the J6 is closed.
Note: In application module, J6=open
6-1-5.The R8 and the R9 R10 R11 is the LED resistor.
Note: In application module, R8 =15 Ohm,
R9 = R10 = R11 = Open