Datasheet

DEM 40271 SYH-LY Product Specification

Version: 1.1.0 PAGE: 4

6. PCB DRAWING AND DESCRIPTION.

DESCRIPTION:

6-1-1.The polarity of the pin 15 and the pin 16 :

LED Polarity

symbol

state

J3,J5 J2,J4

15 Pin 16 Pin

J2,J4 Each solder-bridge Each open Each closed Anode Cathode

J3,J5 Each solder-bridge Each closed Each open Cathode Anode

Note : In application, J3, J5 should be closed , and J2 ,J4 should be open.

6-1-2.The metal-bezel is set be on ground when the J1 is closed . .

Note: In application ,J1 should be closed.

6-1-3.The LED resistor should can be bridged when the J6 is closed.

Note: In application J6 should be opened.

6-1-4.The R7 and the R8 are the LED resistor.

Note: In application, R7=R8=10 Ohm