Datasheet

DEM 40271 FGH-PW Product Specification
Version: 2 PAGE: 5
6. PCB DRAWING AND DESCRIPTION.
DESCRIPTION:
6-1-1. The polarity of the pin 15 and the pin 16:
J3,J5 J2,J4
LED Polarity
15 Pin 16 Pin
Each open Each closed Anode Cathode
Each closed Each open Cathode Anode
Note: In application, J3, J5 should be closed, and J2, J4 should be open.
6-1-2. The metal-bezel is set be on ground when the J1 is closed.
Note: In application, J1 should be closed.
6-1-3. The LED resistor should can be bridged when the J6 is closed.
Note: In application J6 should be opened.
6-1-4. The R7 and the R8 are the LED resistor.
Note: In application, R7=68 Ohm, R8=68 Ohm
6-1-5. The mounting hole is set to ground, when J7 is closed.
Note: In application J7 is closed.