Datasheet

DEM 320240M TMH-PW-N Production Specification
Version: 1.1 PAGE: 20
12.6 Storage
In the case of storing for a long period of time for instance, for years for the purpose or replacement use, the
following ways are recommended.
●.Storing in an ambient temperature 10°C to 30°C, and in a relative humidity of 45% to 75%. Don’t expose to
sunlight or fluorescent light.
●.Storing in a polyethylene bag with the opening sealed so as not to enter fresh air outside in it. And with no
desiccant.
●.Placing in a dark place where neither exposure to direct sunlight nor light’s keeping the storage temperature
range.
●.Storing with no touch on polarizer surface by the anything else.
It is recommended to store them as they have been contained in the inner container at the time of delivery from
us.
12.7 Safety
●.It is recommendable to crash damaged or unnecessary LCD’s into pieces and wash off liquid crystal by
either of solvents such as acetone and ethanol, which should be burned up later.
●.When any liquid leaked out of a damaged glass cell comes in contact with your hands, please wash it off well
with soap and water
13. PRECAUTION FOR USE
13.1 A limit sample should be provided by the both parties on an occasion when the both parties agreed its
necessity. Judgment by a limit sample shall take effect after the limit sample has been established and
confirmed by the both parties.
13.2 On the following occasions, the handing of problem should be decided through discussion and
agreement between responsible of the both parties.
●.When a question is arisen in this specification
●.When a new problem is arisen which is not specified in this specifications
●.When an inspection specifications change or operating condition change in customer is reported to DISPLAY,
and some problem is arisen in this specification due to the change
●.When a new problem is arisen at the customer’s operating set for sample evaluation in the customer site.
14. PACKING SPECIFICATION
Please consult our technical department for detail information.