Datasheet

DEM 240320E TMH-PW-N(A-TOUCH) Production Specification
Version: 2.1.1 PAGE: 23
4
Minor
Chip on corner of neat edge
X: length Y: width
S: width of edge sealing
x≤3 mm y≤3 mm z≤t
acceptable
any chip exposes the silver dot reject
Defect Inspect item Criteria
5
Minor
Chip on corner of terminal edge
D: terminal length
x<0.3 mm or y<0.3 mm ignore
x≤3 mm y<D two are acceptable
Defect Inspect item Criteria
6
Minor
Chip on opposite side of
terminal
a≥80mm，x≥7mm reject
a<80mm， x>5mm reject
y>1/2D reject
z>1/2t，y>1/4D reject
D: terminal length
Defect Inspect item Criteria
7
Minor
Cutting/breaking defect (flare) According to the dimension of drawing
Defect Inspect item Criteria
X
Y
Z
D
x
y
z
D
y
x
z