Datasheet

DEM 20488 FGH-PW Product Specification

Version:8 Page: 5

0 Ohm resistor

6.2 DESCRIPTION:

6-2-1.The polarity of the pin 15 and the pin 16:

LED Polarity

symbol

state

J3, J5 J4, J6

15 Pin 16 Pin

Each solder-bridge Each open Each closed Anode Cathode

Each solder-bridge Each closed Each open Cathode Anode

Note: In application, J3=J5=0 Ohm, J2=J4=J6=open

6-2-2. The metal-bezel is set on ground when the J1 is closed.

Note: In application module, J1=0 Ohm

6-2-3.The LED resistor can be bridged when the J2 is closed

Note: In application module, J2=open

6-2-4.The R7 and the R8 are the LED resistor.

Note: In application module, R7= 100 Ohm, R8=open.

6.3 Example application

6-3-1. The 15 pin is the anode and the 16 pin is the cathode as following.

6-3-2.The 15 pin is the cathode and the 16 pin is the anode as following.