Datasheet

DEM 20487 FGH-PW Product Specification

Version: 7 PAGE: 5

DESCRIPTION:

6-1-1.The polarity of the pin 15 and the pin 16:

LED Polarity

J3,J5 J2, J4

15 Pin 16 Pin

Each open Each closed Anode Cathode

Each closed Each open Cathode Anode

Note: In application module, J2=J4= open and J3=J5=0 Ohm.

6-1-2. The metal-bezel is set be on ground when the J1 is closed.

Note: In application module, J1=0 Ohm.

6-1-3. The LED resistor on board is used when J6 is open.

Note: In application module, J6=open.

6-1-4.The R7 and the R8 are the LED resistor.

Note: In application module, R7=R8=33 Ohm.

6-1-5. The mounting holes is set on ground when the J7 is closed.

Note: In application module, J7=0 Ohm.

6.2 Example application

6-2-1. The LED resistor should be bridged as following.

6-2-2. The 15 pin is the anode and the 16 pin is the cathode as following.

6-2-3.The 15 pin is the cathode and the 16 pin is the anode as following.

6-2-4.The metal-bezel is on ground as following.