Datasheet

DEM 20485 SYH-LY Product Specification
Version: 3 PAGE: 5
6. PCB DRAWING AND APPLICATION
6. PCB Drawing and Description
Note: on application module, R1~R5=820Ω, R6=91KΩ
Description :
6-1. The polarity of the pin 15 and the pin 16
J3,J5 J2, J4
LED Polarity
15 Pin 16 Pin
Each open Each closed Anode Cathode
Each closed Each open Cathode Anode
Note: on application module B00: J3=J5= closed, J2=J4=open
B01: J3=J5= open, J2=J4=closed
6-2. The metal-bezel is set on ground when the J1 is closed.
Note: on application module, J1=closed
6-3. The LED resistor should can be bridged when the J6 is open.
Note: on application module, J6=open
6-4. The R7 and the R8 are the LED resistor.
Note: on application module, R7= R8=10Ω.
6-5. The mounting holes are set on ground when J7 is closed.
Note: on application module, J7=closed