Datasheet

DEM 20485 FGH-PW Product Specification

Version: 1.1.0 PAGE:

6.1 DESCRIPTION:

6-1-1.The polarity of the pin 15 and the pin 16

LED Polarity

symbol

state

J3,J5 J2, J4

15 Pin 16 Pin

J2,J4 Each solder-bridge Each open Each closed Anode Cathode

J3,J5 Each solder-bridge Each closed Each open Cathode Anode

Note: In application module, J2=J4= open and J3=J5=0 Ohm

6-1-2. The metal-bezel is set be on ground when the J1=0 Ohm

Note: In application module, J1=0 Ohm

6-1-3. The LED resistor on board are used when J6 is open

Note: In application module, J6=open

6-1-4.The R7 and the R8 are the LED resistor.

Note: In application module, R7=12 Ohm, R8=open

6.2 Example application

6-2-1. The LED resistor should be bridged as following. Then customer needs to use internal resistors

6-2-2.The 15 pin is the cathode and the 16 pin is the anode as following

6-2-3.The metal-bezel is on ground as following.

0 Ohm resistor

J5 J2

0 Ohm resistor