Datasheet

ManualsBrandsDisplay Elektronik ManualsDisplaysDot Matrix LCD Display 5.55 mm 2 x 20

08/Jan/2018

DISPLAY

Elektronik GmbH

DEM 20231 SYH-PY-CYR22

LCD MODULE

Product Specification

Version

Summary of content (14 pages)

PAGE 1
DISPLAY Elektronik GmbH LCD MODULE DEM 20231 SYH-PY-CYR22 Product Specification Version: 3 08/Jan/2018
PAGE 2
GENERAL SPECIFICATION MODULE NO. : DEM 20231 SYH-PY-CYR22 CUSTOMER P/N VERSION NO. CHANGE DESCRIPTION DATE 0 Original Version 14.06.2004 1 CHANGE IC 27.12.2007 2 ADD VERSION 02.08.2011 3 Change the VDD from -0.3~+7.0 V to -0.3~+6V;VLCD from 3.0~13V to 3.0~ 7V in page7 08.01.2018 PREPARED BY: PS DATE: 08.01.2018 APPROVED BY: MHO DATE: 08.01.
PAGE 3
DEM 20231 SYH-PY-CYR22 Product Specification CONTENTS 1. FUNCTIONS & FEATURES ----------------------------------------------------------------- 2 2. MECHANICAL SPECIFICATIONS -------------------------------------------------------- 2 3. BLOCK DIAGRAM --------------------------------------------------------------------------- 2 4. EXTERNAL DIMENSIONS ---------------------------------------------------------------- 3 5.
PAGE 4
DEM 20231 SYH-PY-CYR22 Product Specification 1. FUNCTIONS & FEATURES MODULE DEM 20231 SYH-PY-CYR22 LCD TYPE STN Yellow Green Transflective Positive Mode l l l l l l l Viewing Direction Driving Scheme Power Supply Voltage VLCD Adjustable for Best Contrast Backlight Color Display contents Internal Memory l l CGROM Interface : 6 O'clock : 1/16 Duty Cycle, 1/5 Bias : 5.0 Volt (typ.) : 4.5 Volt (typ.
PAGE 5
DEM 20231 SYH-PY-CYR22 4. EXTERNAL DIMENSIONS ( Product Specification unit: mm) □: 5. PIN ASSIGNMENT Function Pin No.
PAGE 6
DEM 20231 SYH-PY-CYR22 Product Specification 6. PCB DRAWING AND DESCRIPTION Note: The part no. DEM20231-CYR22 is printed on the PCB. DESCRIPTION: 6-1-1.The polarity of the pin 15 and the pin 16: LED Polarity 15 Pin 16 Pin J3,J5 J2, J4 Each open Each closed Anode Cathode Each closed Each open Cathode Anode Note: in application module, J2=J4=open, J3=J5=closed. 6-1-2. The metal-bezel should be on ground when the J1 is solder-Bridge. Note: in application module, J1= closed. 6-1-3.
PAGE 7
DEM 20231 SYH-PY-CYR22 Product Specification 7. BACKLIGHT & SWITCH (Ta=-20~+70°C) VR=5V Each chip □: 8. DISPLAY DATA RAM (DDRAM) 9. MAXIMUM ABSOLUTE POWER RATINGS (Ta=25°C) Item Symbol Standard value Unit Power supply voltage (1) VDD -0.3~+6.0 V Power supply voltage (2) VLCD VDD-10.0~VDD+0.3 V Input voltage VIN -0.3~VDD+0.3 V Operating temperature Topr -20~+70 °C Storage temperature Tstg -25~+75 °C *Voltage greater than above may damage to the Circuit.
PAGE 8
DEM 20231 SYH-PY-CYR22 Product Specification 10. ELECTRICAL CHARACTERISTICS 10-1 DC Characteristics (VDD=4.5V~5.5V, Ta=-20~+70°C) Item Standard Value Symbol MIN TYP MAX Test Condition Unit Operating Voltage VDD 4.5 5 5.5 ------- V Supply Current IDD ---- 0.35 0.6 VDD=5V,fosc=270kHz mA VLCD 3.0 4.5 7.0 VDD-V5 (1/5 Bias) V LCD Driving Voltage 10-2 AC Characteristics (VDD=4.5V~5.
PAGE 9
DEM 20231 SYH-PY-CYR22 Product Specification 10-2-2 Read mode (Reading data from module to MPU) Characteristic Symbol Min Type Max Unit Test PIN E Cycle Time tC 1200 --- --- ns E E Rise Time tR --- --- 25 ns E E Fall Time tF --- --- 25 ns E E Pulse width (High, Low) tW 140 --- --- ns E R/W and RS Set-up Time tSU 0 --- --- ns R/W,RS R/W and RS Hold Time tH 10 --- --- ns R/W,RS Data Output Delay Time tD --- --- 120 ns DB0~DB7 Data Hold Time tDH 10 -
PAGE 10
DEM 20231 SYH-PY-CYR22 Product Specification 11. CONTROL AND DISPLAY COMMAND Command RS Clear Display 0 R/W DB7 DB6 DB5 DB4 DB3 0 0 0 0 0 0 DB2 DB1 DB0 Execution time (fosc=270KHz) Remark 0 0 1 1.52ms Write”20H” to DDRAM. And set DDRAM address to “00H” from AC Return home 0 0 0 0 0 0 0 0 1 x 1.52ms Set DDRAM address to “00H” from AC and return cursor to its original position if shifted. The contents of DDRAM are not changed.
PAGE 11
DEM 20231 SYH-PY-CYR22 Product Specification 12.
PAGE 12
DEM 20231 SYH-PY-CYR22 Product Specification 13. QUALITY DESCRIPTION DEFECT SPECIFICATION: Specific type-related items are covered in this sheet. a: Table for Cosmetic defects (Note: nc = not counted). Sizes and number of defects (Max. Qty) Segment Deformation (Notched segments L W Line shape W nc 100< d £ 200 5 Black or White Lines W Pinhole d £ 100 Black or White Spots L L L L W W L L Max. Max. defect size [mm] d or L Quantity.
PAGE 13
DEM 20231 SYH-PY-CYR22 Product Specification 14. MODULE ACCEPT QUALITY LEVEL (AQL). 14.1 AQL Standard Value: Critical Defect =0.1, Major Defect=0.65; Minor Defect =2.5. 14.2 Inspection Standard: ANSI Z-1.4 Table Normal Inspection Single Sampling Level II 15. RELIABILITY TEST Operating lifetime: Longer than 50000 hours (at room temperature without direct irradiation of sunlight) Reliability characteristics shall meet following requirements.
PAGE 14
DEM 20231 SYH-PY-CYR22 Product Specification 16. LCD MODULES HANDLING PRECAUTIONS n Please remove the protection foil of polarizer before using. n The display panel is made of glass. Do not subject it to a mechanical shock by dropping it from a high place, etc. n If the display panel is damaged and the liquid crystal substance inside it leaks out, do not get any in your mouth. If the substance come into contact with your skin or clothes promptly wash it off using soap and water.