Datasheet

DEM 16227 SYH-LY Product Specification
VERSION: 2 PAGE: 23
7. Reliability Test
Test items Condition
Time （hrs）
Acceptable
standard
High Storage Temp. +80°C
240
Its function and
appearance
qualified before
and after test
High Operating Temp.
+70°C
Low Storage Temp. -30°C
Low Operating Temp. -20°C
Temp& Humidity Test
+60°C, 90%RH
Thermal Shock
-30°C
¬
+25°C
®
+80°C
(30 min ¬10 min ® 30min)
raising its temperature 5°C / min
10 cycles
Note1: The temperature allowable deviation is ±5°C and the humidity allowable deviation is ±5%RH.
8．Packing
8.1 The acceptance inspection of product packing shall meet design requirements. The product packaging
label shall bear not only product name, part number, quantity, product date code but also QA’s
qualifying stamp for each production stage. Incomplete or wrong label shall be unacceptable.
8.2 When there are problems with packing safety conformity such as shock resistance, moisture resistance,
anti ESD and press resistance, packing shall be disqualified.
8.3 When customer’s special requirements for packing confirmed and accepted by DISPLAY, packing
shall be inspected and released according to them.
8.4 RoHS and non-RoHS compliant products shall be labeled clearly and separately. Unless otherwise
specified by the customer, “RoHS” labels shall be used for all RoHS compliant products.
9 ． Others
9.1 Items not specified in this document or released on compromise should be inspected with reference to
mutual agreement and limit samples.