DISPLAY Elektronik GmbH LCD MODULE DEM 16216 SYH-PY Product Specification Version : 4.1.2 06.10.
GENERAL SPECIFICATION MODULE NO. : DEM 16216 SYH-PY CUSTOMER P/N VERSION NO. CHANGE DESCRIPTION DATE 0 ORIGINAL VERSION 16.01.2001 1 CHANGE AS KS0070 18.01.2001 2 3 CHANGE LCD AND BACKLIGHT ADD VERSION 31.01.2001 14.10.2002 4 ADD MODEL 15.11.2002 4.1.1 CHANGE IC 17.12.2007 4.1.2 CHANGE PCB DESCRIPTION 06.10.2008 PREPARED BY: HCL DATE: 06.10.2008 APPROVED BY: MH DATE: 06.10.
DEM 16216 SYH-PY Product Specification CONTENTS 1.FUNCTIONS & FEATURES ...................................................................................................................................................2 2. MECHANICAL SPECIFICATIONS .....................................................................................................................................2 3. EXTERNAL DIMENSIONS ......................................................................................................
DEM 16216 SYH-PY Product Specification 1.FUNCTIONS & FEATURES MODULE NAME LCD TYPE DEM 16216 SYH-PY STN Yellow-Green Transflective Positive Mode z z z z z z z Viewing Direction Driving Scheme Power Supply Voltage VLCD (VDD-V5) Backlight Display contents Internal Memory z z z Interface Operating Temperature Storage Temperature : 6 o’clock : 1/16 Duty Cycle, 1/5 Bias : 5.0 Volt (typ.) : 4.5 Volt (typ.
DEM 16216 SYH-PY Product Specification 3. EXTERNAL DIMENSIONS VERSION: 4.1.
DEM 16216 SYH-PY Product Specification 4. BLOCK DIAGRAM VSS VDD V0 RS R/ W E DB0~DB7 COM1~16 LCD PANEL 2Li neX16Char act er s SEG41~80 ST7066U-0A SEG0~40 ST7065C A K B/ L 5. PIN ASSIGNMENT Pin No. 1 2 3 Symbol VSS VDD V0 4 RS 5 R/W 6 7 8 9 10 11 12 13 14 15 16 E DB0 DB1 DB2 DB3 DB4 DB5 DB6 DB7 VERSION: 4.1.2 LED – (K) LED + (A) Function Ground terminal of module Supply terminal of module 5.
DEM 16216 SYH-PY Product Specification 6.1 PCB DRAWING AND DESCRIPTION DESCRIPTION: 6-1-1.The polarity of the pin 15and the pin 16: LED Polarity 15 Pin 16 Pin J3,J5 J2, J4 Each open Each closed Anode Cathode Each closed Each open Cathode Anode Note: In application module, J2=J4= open and J3=J5=0 Ohm. 6-1-2. The J1 is metal-bezel GND to module GND and J6 is mounting holes GND to module GND. Note: In application module, J1= J6=0 Ohm. 6-1-3.
DEM 16216 SYH-PY Product Specification 6.2 Example application 6-2-1. The LED resistor should be bridged as following. R7 J7 6-2-2. The 15pin is the anode and the 16 pin is the cathode as following. J5 J2 J4 J3 6-2-3.The 15 pin is the cathode and the 16 pin is the anode as following. J2 J5 J4 J3 6-2-4. The metal-bezel is on ground as following. J1 6-2-5. The mounting hole is on ground as following. J6 VERSION: 4.1.
DEM 16216 SYH-PY Product Specification 7. BACKLIGHT ELECTRICAL AND OPTICAL SPECIFICATIONS 4. 1 20* 2 0. 17 10 4. 5 40* 2 V mA W V mA I f = 20* 2 mA I f = 20* 2 mA I f = 20* 2 mA 40 cd/ m2 I f = 20* 2 mA 0. 05 20 30 572 VERSION: 4.1.
DEM 16216 SYH-PY Product Specification 8. MAXIMUM ABSOLUTE POWER RATINGS (Ta=25°C) Item Power supply voltage(1) Power supply voltage(2) Input voltage Symbol VDD VLCD Standard value -0.3~+7.0 VDD-10.0~VDD+0.3 VIN Topr -0.3~VDD+0.3 -20~+70 -25~+75 Operating temperature Storage temperature Tstg Unit V V V °C °C 9. ELECTRICAL CHARACTERISTICS 9-1 DC Characteristics (VDD=5V,Ta=25°C) Standard Value MIN TYP MAX Item Symbol Operating Voltage VDD 4.7 5.0 5.3 IDD1 ---- TBD 1.
DEM 16216 SYH-PY Product Specification 9-2 AC Characteristics VERSION: 4.1.
DEM 16216 SYH-PY VERSION: 4.1.
DEM 16216 SYH-PY Product Specification 10.
DEM 16216 SYH-PY Product Specification 11. INSTRUCTION TABLE VERSION: 4.1.
DEM 16216 SYH-PY Product Specification 12. INITIALIZING BY INSTRUCTION 12-1. 8-bit interface mode (fosc=270kHz) VERSION: 4.1.
DEM 16216 SYH-PY 12-2. Product Specification 4-bit interface mode VERSION: 4.1.
DEM 16216 SYH-PY Product Specification 13. CHARACTER GENERATOR ROM (ST7066-0A) VERSION: 4.1.
DEM 16216 SYH-PY Product Specification 14. LCD MODULES HANDLING PRECAUTIONS Please remove the protection foil of polarizer before using. The display panel is made of glass. Do not subject it to a mechanical shock by dropping it from a high place, etc. If the display panel is damaged and the liquid crystal substance inside it leaks out, do not get any in your mouth. If the substance come into contact with your skin or clothes promptly wash it off using soap and water.