Datasheet

DEM 16216 FGH-PB Product Specification
Version : 5.1.0 PAGE:7
6.1 PCB DRAWING AND DESCRIPTION
DESCRIPTION:
6-1-1.The polarity of the pin 15 and the pin 16:
LED Polarity
J3,J5 J2, J4
15 Pin 16 Pin
Each open Each closed Anode Cathode
Each closed Each open Cathode Anode
Note: In application module, J2=J4=open, J3=J5=0 Ohm
6-1-2. The J1 is metal-bezel GND to module GND and J6 is mounting holes GND to module GND.
Note: In application module, J1= J6=0 ohm.
6-1-3.The LED resistor should be bridged when the R10 is closed.
Note: In application module, R10=open.
6-1-4.The R7, R8 and R9 are the LED resistor.
Note: R7=24 Ohm, R8=R9=open.