Datasheet

DEM 16216 FGH-P(RGB) Product Specification

Version: 6.1.3 PAGE:5

6. PCB DRAWING AND DESCRIPTION

DESCRIPTION:

6-1-1 The metal-bezel is set on ground when the J1 is closed.

Note: In application module, J1=0 Ohm.

6-1-2. The mounting holes is set on ground when the J2 is closed.

Note: In application module, J2=0 Ohm.

6-1-3.The R7, R8 and R9 are LED resistor.

Note: In application module,

R7 is used for the red LED,

R8 is used for the green LED and

R9 is used for blue LED.

R7=R9=47 Ohm, R8=33 Ohm.

6.2 Example application

6-2-1. The metal-bezel is on ground as following.

6-2-2. The mounting hole is on ground as following.