Datasheet

DEM 16214 SYH-LY Product Specification
Version: 5.1.2 PAGE:5
6. PCB DRAWING AND DESCRIPTION
6.1 DESCRIPTION:
6-1-1.The polarity of the pin 15and the pin 16:
LED Polarity
J3,J5 J2, J4
15 Pin 16 Pin
Each open Each closed Anode Cathode
Each closed Each open Cathode Anode
Note: In application module, J3=J5=0 Ohm, J2=J4=open.
6-1-2. The J1 is metal-bezel GND to module GND and J6 is mounting holes GND to module GND.
Note: In application module, J1= J6=0 Ohm.
6-1-3.The LED resistor should be bridged when the R7, R8, R9, J7 is closed.
Note: In application module, R7=R8=33 Ohm, R9=J7=open.