DISPLAY Elektronik GmbH LCD MODULE DEM 16207 FGH-PW Product Specification Version : 4 01.09.
GENERAL SPECIFICATION MODULE NO. : DEM 16207 FGH-PW CUSTOMER P/N Version NO. Change Description Date 0 Specification Released 07.02.2013 1 Revised Optical Characteristics 21.02.2013 1.0 Change Production Line Update the dimension 4.35mm in page 4 and adding chapter 18/19/20 Update LCD drawing/Update BL Luminance Delete the dimension 2.67 on page 4; Update the block diagram on page 5; Update definition of characteristics on page 11-16 Change Dimension 12.05.2017 1.1 2 3 4 15.05.2017 23.05.
DEM 16207 FGH-PW Product Specification CONTENTS 1. FUNCTIONS &FEATURES .................................................................................................................................................. 2 2. MECHANICAL SPECIFICATIONS ..................................................................................................................................... 2 3. EXTERNAL DIMENSIONS (Unit: mm) ..........................................................................................
DEM 16207 FGH-PW Product Specification 1. FUNCTIONS &FEATURES MODULE NAME DEM 16207 FGH-PW l l l l l l l LCD Type FSTN Transflective Positive Mode Viewing Direction Driving Scheme Supply Voltage Vop Adjustable For Best Contrast Driver IC Interface RoHS Compliant : 6 O’clock : 1/16 Duty, 1/5 Bias : 4.2 Volt (typ.) : 4.2 Volt (typ.) : ST7032i (Sitronix) : I2C 2. MECHANICAL SPECIFICATIONS l l l Module Size (without FPC) Viewing Area Active Area Version: 4 : 59.00 x 26.00 x 4.35 mm : 50.00 x 16.
DEM 16207 FGH-PW 3.
DEM 16207 FGH-PW Product Specification 4. BLOCK DIAGRAM COM16 COM9 LCD PANELCOM8 COM1 SEG1 SEG80 A K CAPINVOUT VDD VSS SDA SCL RST CAP1P+ IC : ST7032i BACKLIGHT 5. PIN ASSIGNMENT Pin No. 1 Name RST 2 SCL Serial Clock Input 3 SDA Serial Data I/O 4 VSS Ground. 5 VDD Power Supply 6 CAP1+ 7 CAP1- 8 VOUT Version: 4 Description Reset Signal Input(Active Low) For voltage booster circuit (VDD-VSS) External capacitor about 0.1uF~4.7uF DC/DC voltage converter.
DEM 16207 FGH-PW Product Specification 6.
DEM 16207 FGH-PW Product Specification 7. ABSOLUTE MAXIMUM RATINGS Characteristic Power Supply Voltage LCD Driver Voltage Input Voltage Operating Temperature Storage Temperature Symbol VDD Vop VIN Topr Tstg Value -0.3 to+6.0 7.0 - Vss to -0.3 + Vss -0.3 to VDD+0.3 -20 to +70 -30 to +80 Unit V V V ℃ ℃ 8. ELECTRICAL CHARACTERISTICS 8.1 DC CHARACTERISTICS Parameter Symbol Min. Typ. Max. Unit Supply Voltage VDD 3.9 4.2 4.5 V LCD Supply Voltage Vop 3.9 4.2 4.
DEM 16207 FGH-PW Product Specification 8-2.
DEM 16207 FGH-PW Product Specification 9.
DEM 16207 FGH-PW Product Specification 10.
DEM 16207 FGH-PW Product Specification 11. LCD ELECTRICAL& OPTICAL CHARACTERISTICS Ta=25°C Item Symbol Contrast Cr Viewing Angle θ2-θ1 Tr Response Time Tf Description Condition θ=5°, Φ=0° Min. Typ. Unit 3.0 6o’clock axis Cr≥2.0 Φ=0° 30 Rise θ=5°, Φ=0° --- --- θ=5°, Φ=0° ----- ----- Fall Max. ° 240 ms 220 11.1 Definition of Characteristics.
DEM 16207 FGH-PW Product Specification Definition of contrast Cr. = B2 Bright curve of not selected segment B1 = Bright curve of selected segment Bright (%) B2 Brightbess Bright curve of non-selected segment Bright curve of selected segment Dark B1 Operating voltage (V) 11.2.
DEM 16207 FGH-PW Product Specification 11.
DEM 16207 FGH-PW Product Specification 12. LCD ARTWORK 13.
DEM 16207 FGH-PW Product Specification 14. COM LAYOUT 15.
DEM 16207 FGH-PW Product Specification 16. ACCEPT QUALITY LEVEL (AQL) AQL Standard Value: Critical Defect =0.1, Major Defect=0.65; Minor Defect =2.5. 17. RELIABILITY TEST Operating life time: 50000 hours (at room temperature without direct irradiation of sunlight) Reliability characteristics shall meet following requirements.
DEM 16207 FGH-PW Product Specification 18. QUALITY DESCRIPTION DEFECT SPECIFICATION: a: Table for Cosmetic defects (Note: nc = not counted). Sizes and number of defects (Max. Qty) Segment Deformation (Notched segments L L d £ 150 nc 150< d £ 200 3 Black or White Spots W W L L Max. Max. defect size [mm] d or L Quantity .
DEM 16207 FGH-PW Product Specification 19. LCD MODULES HANDLING PRECAUTIONS n Please remove the protection foil of polarizer before using. n The display panel is made of glass. Do not subject it to a mechanical shock by dropping it from a high place, etc. n If the display panel is damaged and the liquid crystal substance inside it leaks out, do not get any in your mouth. If the substance come into contact with your skin or clothes promptly wash it off using soap and water.
