Datasheet

DEM 08202 SYH-LY General Specification
VERSION: 3 PAGE: 7
6. PCB DRAWING AND DESCRIPTION
7 7 7
7 7 7
21
12
12
2
1
2 1
2 1
2 1
21
21
21
21
21
21
21
1
3
5
7
9
11
13
15
2
4
6
8
10
12
14
16
2 1
Note: The part no. DEM 08202 is printed on the PCB.
6.1 DESCRIPTION:
6-1-1.The polarity of the pin 15 and the pin 16:
LED Polarity(1) LED Polarity(2)
15 Pin 16Pin 15 Pin 16 Pin
Anode Cathode Cathode Anode
J3=J5=open
J2=J4=closed
J3=J5= closed
J2=J4= open
Note: In application module, J3=J5= open and J2=J4=Closed
6-1-2. The metal-bezel is set be on ground when the J1 is closed
Note: In application module, J1= closed
6-1-3. The LED resistor on board are used when J6 is open.
Note: In application module, J6=open
6-1-4.The R7 and the R8 are the LED resistor.
Note: In application module, R7=30 Ohm, R8=30 Ohm
6-1-5. The mounting holes are set on ground when J7 is closed.
Note: on application module, J7=closed