Datasheet

DEM 08172 SYH-PY Product Specification
Version: 5.1.4 PAGE: 5
6. PCB DRAWING AND DESCRIPTION
DESCRIPTION:
6-1-1 The polarity of the pin L+ and the pin L-:
J3,J5 J2, J4
LED Polarity
L- L+
Each open Each closed Anode Cathode
Each closed Each open Cathode Anode
Note: In application module, J2=J4= open and J3=J5=closed
6-1-2 The metal-bezel is set on ground when the J1 is closed
Note: In application module, J1=closed
6-1-3 The mounting-holes should be on ground when the J7 is close.
Note: In application module, J7=closed
6-1-4 The LED resistor should be bridged when the J6 is closed.
Note: In application module, J6=open
6-1-5 The R6 and the R7 is the LED resistor.
Note: R6=24 Ohm, R7=open.