Display Elektronik GmbH LCD STANDARD PANEL DE 122 - SERIES Product specification Version : 1 27.01.
GENERAL SPECIFICATION MODULE NO. : DE 122 - SERIES CUSTOMER P/N VERSION NO. CHANGE DESCRIPTION DATE 0 ORIGINAL VERSION 06.12.2001 1 CHANGED MODEL TYPES 27.01.2005 PREPARED BY: MHO APPROVED BY: MH DATE: 27.01.2005 DATE: 27.01.
DE 122 - SERIES Product Specification CONTENTS 1. GENERAL FEATURES---------------------------------------------------------------------- 2 2. ORDERING INFORMATION---------------------------------------------------------------2 3. MODEL TYPES------------------------------------------------------------------------------- 2 4. MECHANICAL SPECIFICATIONS--------------------------------------------------------3 5. PIN ASSIGNMENT--------------------------------------------------------------------------- 3 6.
DE 122 – SERIES Product Specification 1. GENERAL FEATURES Display Elektronik GmbH is specialized in LCD-products. - There is a wide range of standard lcd-panels. Most of them are available from stock. - Most of our standard panels operate within the extended temperature range (–20°C to +70°C). - For the static types the Vlcd is ready for 3 Volt, like shown in the following table. For most of our multiplexed standard panels we offer a 3Volt and a 5Volt model.
DE 122 – SERIES Product Specification 4. MECHANICAL SPECIFICATIONS 5.
DE 122 – SERIES Product Specification 6. ELECTRICAL AND PHYSICAL PROPERTIES 7. APPLICATION NOTE 8.
DE 122 – SERIES Product Specification 9. CONNECTING LCDs - Fixed pins have a typical pitch of 2,54mm. (Pls refer to mechanical specification). - LCD for elastomeric connectors (zebras) may have thighter pitches. Please regard tolerances and pitch of elastomer connector. 10. SOLDER CONDITIONS FOR LCD WITH FIXED PINS min. typ. max. Solder temperature t.b.d. ~ 235°C 260°C Solder duration t.b.d. 2 seconds 5 seconds 6mm t.b.d. Distance to glass substrate 4mm t.b.d. – to be discussed ! 11.
