User`s guide

17
OPERATION (CONTINUED)
Press the Preset Set/CD Program
button again; the selected track has
now been programmed and counted
as program 1.
5
Repeat steps 4 and 5 to program the
other desired tracks in sequence (up to
16 tracks).
2
1
6
Press the Play/Pause ( ) button to
begin playback; the PROGRAM
indicator will appear in the display and
the tracks will play in the order
programmed.
7
NOTES:
• Programming is the ability to preselect the order in which a series of tracks will be played.
• Each track may be stored in the program memory as many times as desired (up to 16).
• As each track is played, its track number will be displayed. You can move forward or
backward through the programmed tracks with the Skip/Search/Tune or button.
• The CD player will stop after all programmed tracks have been played or the Stop (■)
button is pressed.
• To cancel program playback, press the Stop (■) button while in the stop mode, or open
the CD Door.
• To check the program, press the Preset Set/CD Program button once more; the display
will show the track numbers in the order they were programmed.
DB3000.O/M.QXD 1/24/03 4:06 PM Page 17