User`s guide

remaining free space may be used if the operating

system supports this. NOTE - Macintosh users will

not be able to access the extra space after a disk

copy.

5. Sector-by-sector copies copy the free space on the

disk. For example, if you have a 20 GB drive and

it only contains 10 GB of information, the Disk

Jockey will still copy the unused sectors of the hard

disk drive to the disk attached to the Drive2 port.

Therefore the copy time is really dependant on the

disk size and capacity rather than the amount of

data on the hard disk drive.

NOTE - No data is written to the hard disk drive attached

to the Drive1 port. The Disk remains in the exact state that

it was in prior to being attached to the Disk Jockey. This

can be important when working with forensic evidence, i.e.

copying the contents of one hard drive to another without

disturbing the original hard disk drive.

To Copy

1. Position the mode select switch to copy mode, Mode 3.

2. Connect the “Copy From” hard disk drive to the

Drive1 port, connect the “Copy To” hard disk drive

to the Drive2 port.

3. Push down on the Blue Function button ﬁrmly. The

ﬁrst push of the button will apply power to the hard

disk drives and they will begin to rotate, or spin up.