User`s guide

30
2 ports.
3. Push down on the Blue Function Button (located
on the top of the Disk Jockey) one time. This will
apply power to the hard disk drives and they will
begin to rotate (spin up). The Power light, located
on the “Drive1” side of the Disk Jockey will be
red. When the Power light turns green the hard
disk drives should mount to the desktop (Mac) or
become accessible under My Computer (Windows)
making them accessible to your computer for
erasing, partitioning or formatting the drives. You
will only see one hard disk drive but the data will be
copied from one to the other when necessary.
MODE 3 (DISK-TO-DISK COPY MODE)
Mode 3 is disk-to-disk copy mode. In this mode, a hard
disk drive attached to the Drive1 port is copied sector-
by-sector to a hard disk drive on the Drive2 port. You’ll
notice the arrow on the face of the Disk Jockey pointing
from the Drive1 port to the Drive2 port. This was done to
provide you with a visual indicator of the direction of data
flow, meaning always be sure to put the “copy from” disk
on Drive1 and the “copy to” disk on Drive2. In Disk Copy
mode the Disk Jockey IS NOT connected to the computer.
The Copy mode does a complete sector-by-sector copy of
the original hard disk drive. It will copy over partition files,
hidden files and all data on the drive. There are several
items of note when working in Copy mode: