User`s guide

NOTE: At shipping the unit is set to Mode 0, or standard

mode

Audible Warning Sounds

The Disk Jockey has been designed to alert you to any

failures during the various operations via audible warning

sounds emitted from the Disk Jockey body. The audible

warnings are as follows:

1. Three long beeps (beeeeep, beeeeep, beeeeep)

indicates that there is no hard disk drive attached

to the Drive 1 port or that the hard disk drive that

is attached to the Drive 1 port is not Ultra DMA

compatible. It can also alert you to a disk error on

the hard disk drive attached to the Drive 1 port.

2. Three short beeps (beep, beep, beep) indicates that

there is no hard disk drive attached to the Drive 2

port or that the hard disk drive that is attached to the

Drive 2 port is not Ultra DMA compatible. It can

also alert you to a disk error on the hard disk drive

attached to the Drive 2 port.

3. A combination of three beeps, two short and one

long (beep, beep, beeeeep) means that there is no

hard disk drive attached to both Drive 1 and Drive 2

ports or that the two drives attached to the two ports

are not Ultra DMA compatible.

For more detailed information on how to correct the

beeping please see the Troubleshooting section at

the end of this manual.