EN User Manual Dishwasher DSF6306X
Contents Safety information Safety instructions Control panel Programs Settings Before first use 2 3 5 5 6 8 Daily use Hints and tips Care and cleaning Troubleshooting Technical information Warranty 8 11 12 13 14 14 Subject to change without notice. Safety information Before the installation and use of the appliance, carefully read the supplied instructions. The manufacturer is not responsible for any injuries or damages that are the result of incorrect installation or usage.
by clients in hotels, motels, bed & breakfast and other residential type environments. Do not change the specification of this appliance. The operating water pressure (minimum and maximum) must be between 0.5 (0.05) / 8 (0.8) bar (kPa) Obey the maximum number of 13 place settings. If the supply cord is damaged, it must be replaced by the manufacturer, its Authorised Service Centre or a similarly qualified persons in order to avoid a hazard.
• • Connect the mains plug to the mains socket only at the end of the installation. Make sure that there is access to the mains plug after the installation. Do not pull the mains cable to disconnect the appliance. Always pull the mains plug. Water connection • • • • Do not cause damage to the water hoses. Before connection to new pipes, pipes not used for a long time, where repair work has been carried out or new devices fitted (water meters, etc.), let the water flow until it is clean and clear.
Control panel 1 2 5 1 On/off button 2 Display 3 Indicators 3 4 4 Delay button 5 Program buttons Indicators Indicator Description End indicator. Multitab indicator. Rinse aid indicator. It is always off while the program operates. Programs Program Degree of soil Type of load 2) Normal soil Crockery and cutlery Program phases • • • • Prewash Wash 50 °C Rinses Dry Consumption values 1) Duration (min) Energy (kWh) 129 0.77 Water (l) 11.
Program Degree of soil Type of load Program phases Consumption values 1) Duration (min) Energy (kWh) 40 - 150 0.6 - 1.4 7 - 12 • • Prewash Wash from 45 °C to 70 °C Rinses Dry Heavy soil Crockery, cutlery, pots and pans • • • • Prewash Wash 70 °C Rinses Dry 130 - 150 1.3 - 1.5 13 - 15 4) Fresh soil Crockery and cutlery • • Wash 60 °C Rinse 30 0.9 9 5) All • Prewash 14 0.
The appliance is in Program selection mode when all the program indicators come on and the display shows 2 horizontal status bars. When the appliance is in Program selection mode it is possible to set a program. If the control panel does not show this condition, use the Reset function. Reset With Reset you can cancel the running program or the delay start. Press and hold appliance goes back to the Program selection mode. and until the Activating Rinse Aid with option Multi Tab activated 1.
Before first use 1. 2. 3. Fill the rinse aid dispenser. Open the water tap. Start a program to remove any processing residuals that can still be inside the appliance. Do not use detergent and do not load the baskets. Adding rinse aid 1 43 21 2 The rinse aid helps to dry the dishes without streaks and stains. It is automatically released during the hot rinse phase. Daily use 1. 2. Open the water tap. Set the correct program for the type of load and the degree of soil.
Adding multi-tablets 1 2 The Auto Off function This function decreases energy consumption by deactivating automatically the appliance when it is not operating. The function comes into operation: • 5 minutes after the completion of the program. • After 5 minutes if the program has not started. Starting a program 1. 2. 3. Press the on/off button to activate the appliance. Make sure that the appliance is in program selection mode. Press the button related to the program you want to start.
Option Delay max. 1. 2. 3. Set the program. Press Delay until the display shows the delay time you want to set. Close the appliance door, the countdown starts. The countdown starts to decrease with steps of 1 hour. When the countdown is completed the program starts. Option Multi Tab Activate or deactivate the Multi Tab option before the start of the program. This option will stay on until you deactivate it. Activate Multi Tab option only when you use the combi detergent tablets.
5 min Press the on/off button to deactivate the appliance. If you don't press the on/off button, the Auto Off function automatically deactivates the appliance a few minutes after the end of the program. Hints and tips General What to do if you want to stop using multi-tablets The following hints will ensure optimal cleaning and drying results in daily use and also help to protect the environment. Before you start to use separately detergent and rinse aid do the following procedure.
• The correct quantity of detergent is used. At the end of the program water can still remain on the sides and on the door of the appliance. Unloading the baskets 1. 2. Let the tableware cool down before you remove it from the appliance. Hot items can be easily damaged. First remove items from the lower basket, then from the upper basket. For the better drying results open the door 5-10 cm and allow tableware to cool down for 30-40 min.
Troubleshooting If the appliance does not start or it stops during operation. Before you contact an Authorised Service Centre, check if you can solve the problem by yourself with the help of the information in the table. Problem and alarm code With some problems, the display shows an alarm code. Possible solution You cannot activate the appliance. • • Make sure that the mains plug is connected to the mains socket. Make sure that there is no a damage fuse in the fuse box. The program does not start.
Problem Possible solution • The dishes are wet. • • • • The program does not have a drying phase or has a drying phase with low temperature. The rinse aid dispenser is empty. The quality of the rinse aid can be the cause. Keep the dishwasher door ajar for some time before removing tableware. The quality of the multi-tablets can be the cause. Try a different brand or activate the rinse aid dispenser and use rinse aid and multi-tablets together. Refer to "Hints and tips" for other possible causes.
future reference should you require service for your Appliance. 1. 2. 3. 4.
10. For Appliances and services provided by Electrolux in Australia, the Appliances come with a guarantee by Electrolux that cannot be excluded under the ACL. You are entitled to a replacement or refund for a major failure and for compensation for any other reasonably foreseeable loss or damage. You are also entitled to have the Appliance repaired or replaced if the Appliance fails to be of acceptable quality and the failure does not amount to a major failure.
www.dishlex.com.
