EN User Manual Dishwasher DSF6205W DSF6205X
Contents Safety information Safety instructions Control panel Programs Settings Before first use 2 3 4 5 6 7 Daily use Hints and tips Care and cleaning Troubleshooting Technical information Warranty 7 10 11 11 13 13 Subject to change without notice. Safety information Before the installation and use of the appliance, carefully read the supplied instructions. The manufacturer is not responsible if an incorrect installation and use causes injuries and damages.
• • • • • • • • • If the supply cord is damaged, it must be replaced by the manufacturer, its Authorised Service Centre or a similarly qualified persons in order to avoid a hazard. Put knives and cutlery with sharp points in the cutlery basket with the points down or in a horizontal position. Do not keep the appliance door open without supervision to prevent to fall on it. Before maintenance, deactivate the appliance and disconnect the mains plug from the mains socket.
• • • • Do not drink and play with the water in the appliance. Do not remove the dishes from the appliance until the programme is completed. There can be detergent on the dishes. The appliance can release hot steam if you open the door while a programme operates. Do not put flammable products or items that are wet with flammable products in, near or on the appliance. Service • Contact the Authorised Service Centre to repair the appliance. We recommend only the use of original spare parts.
Indicator Description End indicator. Multitab indicator. Rinse aid indicator. It is always off while the program operates. Programs Program Degree of soil Type of load Program phases Consumption values 1) Duration (min) Energy (kWh) Water (l) Normal soil Crockery and cutlery • • • • Prewash Wash 50 °C Rinses Dry 128 0.75 11.7 Normal soil Crockery and cutlery • • • • Prewash Wash 65 °C Rinses Dry 100 - 120 1.2 - 1.
Settings Program selection mode The appliance is in Program selection mode when the program duration flashes in the display. If the control panel does not show this condition, use the Reset function. Reset With Reset you can cancel the running program or the delay start. The appliance goes back to the Program selection mode. User mode While the appliance is in program selection mode: 1. Turn the program knob until the program marker is aligned with 2.
Activating Rinse Aid with option Multi Tab activated 1. Make sure that the appliance is in Program selection mode. 2. Turn the program knob until the program marker is aligned with 3. Press and hold at the same time Multi Tab and Delay until the indicators 4. Press Delay. The indicators and go off. The indicator current setting of the rinse aid dispenser. • 5. 6. . , and start to flash . continues to flash. The display shows the = rinse aid dispenser deactivated.
Adding detergent 1 A B 30 20 2 If the program has a prewash phase, put a small quantity of detergent also in compartment B. Adding multi-tablets A B 30 30 20 20 The Auto Off function This function decreases energy consumption by deactivating automatically the appliance when it is not operating. The function comes into operation: • 5 minutes after the completion of the program. • After 5 minutes if the program has not started. Starting a program 2 1 1. 2. 3. 4.
Option Delay max. 1. 2. 3. Set the program. Press Delay again and again until the display shows the delay time you want to set. Press Start. The countdown starts to decrease with steps of 1 hour. When the countdown is completed the program starts and the indicator of the running phase come on. Option Multi Tab Activate or deactivate the Multi Tab option before the start of the program. This option will stay on until you deactivate it.
Hints and tips General Loading the baskets The following hints will ensure optimal cleaning and drying results in daily use and also help to protect the environment. • • • • • • • Remove larger residues of food from the dishes into the waste bin. Do not pre-rinse dishes by hand. When needed, use the prewash program (if available) or select a program with a prewash phase. Always use the whole space of the baskets.
Care and cleaning Warning! Before maintenance, deactivate the appliance and disconnect the mains plug from the main socket. Dirty filters and clogged spay arms decrease the washing results. Make a check regularly and, if necessary, clean them. Cleaning the filters B A C • • • • Make sure that there are no residues of food or soil in or around the edge of the sump. Put back in place the flat filter (C). Make sure that it is correctly positioned under the 2 guides. Reassemble the filters (A) and (B).
Problem and alarm code Possible solution You cannot activate the appliance. • • Make sure that the mains plug is connected to the mains socket. Make sure that there is no a damage fuse in the fuse box. The program does not start. • • • Make sure that the appliance door is closed. Press Start. If the delay start is set, cancel the setting or wait for the end of the countdown. The appliance has started the procedure to recharge the resin inside the water softener.
Technical information Dimensions Width / height / depth (mm) 600 / 850 / 625 Electrical connection 1) Voltage (V) 220 - 240 Frequency (Hz) 50 Water supply pressure Min. / max. bar (MPa) 0.5 (0.05) / 8 (0.8) Water supply Cold water or hot water 2) max 60 °C Capacity Place settings 12 Power consumption Left-on mode (W) 0.99 Power consumption Off-mode (W) 0.10 1) Refer to the rating plate for other values. 2) If the hot water comes from alternative source of energy, (e.g.
2. 3. 4. 5. 14 Road, Mount Wellington, in respect of Appliances purchased in New Zealand; f) ‘major failure’ as referred to in clause 10 of this warranty has the same meaning referred to in the ACL and includes a situation when an Appliance cannot be repaired or it is uneconomic for Electrolux, at its discretion, to repair an Appliance during the Warranty Period; g) ‘Warranty Period’ means: – where the Appliance is used for personal, domestic or household use (i.e.
11. 12. 13. 14. Appliances or services to which the warranty relates. At all times during the Warranty Period, Electrolux shall, at its discretion, determine whether repair, replacement or refund will apply if an Appliance has a valid warranty claim applicable to it. For Appliances and services provided by Electrolux in New Zealand, the Appliances come with a guarantee by Electrolux pursuant to the provisions of the Consumer Guarantees Act, the Sale of Goods Act and the Fair Trading Act.
www.dishlex.com.
