Quick Start Guide

MODEM EXCHANGE INSTRUCTIONS
Getting Started
Connect and Setup Your Modem
Getting Started (continued)
1.
2.
DN004020
DN004020
Contact dishNET at 1-800-333-DISH (3474)
to authorize your replacement modem.
Then, shut down the computer that the
original modem is connected to.
Unplug the modem power supply
from the outlet or power source
and then disconnect power supply
cable from the original modem.
4.
Connect the Ethernet cable to the
LAN port on the replacement modem.
3.
Disconnect the coax and Ethernet
cables from the original modem.
6.
Plug the replacement DC power cord
into the DC IN port on the replacement
modem.
5.
Connect the coax cable to the SAT
port on the replacement modem.
Securely hand tighten this connection,
DO NOT use a wrench.

Summary of content (8 pages)