User Guide

Improving Receiver Control

Chapter 10

IMPROVING RECEIVER CONTROL

These instructions help you improve your remote control settings to best operate your

satellite receiver.

Making the Remote Work with the Receiver

These instructions configure your remote.

1 Turn your receiver and TV on, and press SYSTEM INFO on the front of the receiver.

2 Confirm that you see the System Info screen.

3 Press RECORD on your remote. The receiver then matches the remote’s address.

4 Confirm that your remote operates your receiver by pressing remote buttons. If this is not

working, go back to step 3.

Checking the Remote Control Address

1 Press and hold SAT for three seconds, until all of the Mode buttons light up, and then

release SAT.

2 Press POUND (#) twice. The SAT mode button flashes the same number of times as the

address number (for example, three flashes means address 3).

Turn your receiver

and TV on, and press

SYSTEM INFO on the

front of the receiver

Confirm that

you see the

System Info screen

Press RECORD.

The receiver then

matches the

remote’s address

Confirm that your

remote operates your

receiver by pressing

remote buttons