User Guide

24
Setting Auto-Tune for
DVD/VCR
Make sure the remote control
operates your DVD/VCR.
Press and hold DVD until all
four Mode buttons are lit.
Press STAR (*).
Enter the channel used for
viewing (two or three digits
in range of 002 to 125), for
example channel “03” or “004.”
Press POUND (#). The DVD
Mode button ashes three
times to indicate programming
was successful.
1
2
3
4
5
You can set Auto-Tune for your DVD and/or VCR.
Auto-Tune allows you to return to the channel
for your DVD/VCR output when you accidentally
change the channel or video input.
Note: This feature is only used while recovering
your picture. See Recovering your Picture on
page 26.