User Guide

Page 63
Watching One Program While Recording Another
5. Press RECORD and select OK when the popup screen displays. You are
now recording two programs or events at the same time.
6. Press the DVR button on your remote control. The
DVR Event screen will
open. You should see the two programs that are recording, indicated by the
red dot next to the listings in the
Program Guide.
7. Select a program or event that you recorded earlier (not one that is recording
now), and then select
Start Over.
8. You should now be watching a pre-recorded program while your satellite
receiver continues recording the other two programs or events.
Setting Up an Automatic Event Timer
1. Select a future program by using the Browse
Banner, the Themes menu or the Program Guide.
2. Select a
Timer Frequency option. Note the mark to the left of your option.
3. Select a
Timer Type. See “Event Timer Types” on page 55.
4. Select the
Create Timer option to save the event timer.
5. The
Guide shows which satellite receiver tuner is to record the event.
Tip: The IR remote
control s used to
control the menus
and programming
on the nearby TV.
An optional IR/UHF
Pro remote control
can be used to
control the receiver
from another room.