User Guide

Page 19
Chapter 2
Receiver Description and Installation
Receiver Front Panel
Smart Card Door
Behind this door is a slot for insertion of a smart card. A smart card, if one is
included with your receiver, is required to access your programming services.
Arrow Buttons
You can use the ARROW buttons to change satellite channels displayed on your
TV. From within a menu, use these buttons to move the on-screen highlight up
or down.
Indicators
• TV1 Power—The green light indicates that the receiver is providing
programming to your TV through the rear-panel
TV1 output connections.
•
Recording—The red light indicates that the DVR is recording an event.
Buttons
The buttons on the receiver give you some control of the receiver. However,
most of the time you will want to use the remote control that came with your
receiver.
•
System Info—Displays the receiver’s System Info screen on your TV.
•
Menu—Displays the Main Menu. After you press this button, use the
ARROWS and the SELECT button to navigate through the menus.
•
Arrows/Select—Use the ARROWS and SELECT button the same way as
the ARROWS and SELECT
button on the remote control.
•
Power—Press the POWER button to turn on satellite programming to your
TV, or to turn it off (that is, to place the receiver in standby mode) if it’s on.
IR Sensor
The INFRARED (IR) SENSOR receives IR signals from the remote control.