User Guide

17
Programming Remote to
Control Another Device
Entering a Code, continued
Enter one of the three-
digit device codes from the
table, found in step 2, using
buttons on the number pad,
such as device code 560.
Press 1 after the device
code if you want to program
Limited Mode. See Placing
Remote in Limited Mode and
Removing Limited Mode on
page 21 for more information.
Press POUND (#). The Mode
button ashes three times.
Press POWER to test if the
code works for the device. If
it does, the device turns off.
Turn device on and try other
buttons to make sure the
device responds the way
you expect. If you want to
try another code, begin from
Step 1 again.
If you are unable to nd
a code that works, try the
instructions for Scanning
the Remote Database on
page 18.
7
6
5
8
4