User Guide

11
Making the 6.4 UHF Remote Work with
DISH-Player DVR 522 and 625 Receivers
Making the 6.4 UHF Remote Work with
DISH-Player DVR 522 & 625 Receivers, con’t.
6
7
10
9
8
Select the TV1 UHF Pro
Setup screen and select
Enable.
Select System Info and
conrm that you see the
System Info screen.
Use the ARROW buttons to
highlight the Rem Addr
box.
Note: If you do not move
the highlight, the remote
changes the receiver’s
Rem Addr box and
causes the remote to
control the TV2 side of
the receiver.
Press the RECORD button
on the green TV1 remote
control. If you receive a
warning to pick another
remote address, continue
to the next step. If no
warning appears, go to
step 16.
Select OK on the front of
the receiver to clear the
warning message and
return to the System Info
screen.
2
1
1
IR
Primary Remote Address