User Guide

8
Changing the UHF Frequency for the
ViP222, ViP622, and ViP722
Only use this procedure if you are
using two UHF remotes. All other
receivers must use Band A position
or the remote does not control the
receiver.
Your remote has a switch to change the UHF
frequency. The remote comes preset to the Band
A position. You can change the setting to the Band
B position to reduce the possibility of another UHF
remote interfering with your UHF remote.
A
B
AAA
AAA
AAA
AAA
A
B
AAA
AAA
AAA
AAA
3
2
1
Pull the remote battery
cover off.
Use a small screwdriver
or a paperclip to carefully
change the remote
frequency from the
Band A position to the
Band B position.
Replace the remote
battery cover.
A
B
AAAAAA
Only for ViP222, ViP622, and ViP722 Receivers