User Guide

3
Making 3.4 and 4.4 IR
Remote Work with Receiver
Turn your receiver
and TV on, and press
SYSTEM INFO on the
front of the receiver.
Note: For DISH 322
receivers, press POWER
on the receiver’s
front panel to put the
receiver in standby
and then press the UP
ARROW on the
receiver front panel.
Conrm that you see the
System Info screen.
Press RECORD on your
remote. The receiver
then matches the
remote’s address.
Conrm that your remote
operates your receiver by
pressing remote buttons.
If this is not working,
return to step 3.
1
2
3
4
1
For 3.4 and 4.4 IR
Use the following
instructions to
congure your remote
while using IR signals.
POWER