User Guide

11
Programming Remote to
Control Another Device
Entering a Code, continued
Enter one of the three-digit
device codes from the
table found in step 2, using
buttons on the number
pad, such as device code
560. Press 1 after the
device code if you want to
program Limited Mode. See
Placing Remote in Limited
Mode on page 15 for more
information.
Press POUND (#). The
Mode button ashes three
times.
Press POWER to test if the
code works for the device. If
it does, the device turns off.
Turn device on and try other
buttons to make sure the
device responds the way
you expect. If you want to
try another code, begin from
Step 1 again.
If you are unable to nd
a code that works, try the
instructions for Scanning
the Remote Database on
page 12.
7
6
5
8
4