User Guide

Chapter 9
56
Operating Other Devices
2 Using the insert of device names and codes that came with the remote control, find the
brand name of the device. If the brand is not listed, see Programing using Device Codes
Scan.
3 Press and hold the Mode button until all the other mode buttons light up, and then release
the button. The Mode button flashes. For example, hold TV for a TV until all of the other
mode buttons light. When you release it, TV flashes.
4 For AUX only. Press 0 for a second TV, 1 for a second DVD and/or VCR, 2 for a tuner or
amplifier, or audio receiver. If you are not programming in AUX mode, skip to step 5.
5 Enter one of the three-digit device codes for your brand from the table using the number
buttons. The three-digit device code should be for the brand name of your device that you
found in step 2.
6 If you want to program Limited Mode, press 1. If not, skep to step 7. See Limited Mode for
more information.
7 Press POUND (#). The Mode button flashes three times.
8 Press POWER to turn off the device. If the device does not turn off, go to step 10. If the
code works, the device turns off.
9 Turn the device back on and try some other buttons to make sure they work. If the code
works for other buttons, stop here. Sometimes POWER works when other buttons do not.
If in Limited Mode, try VOLUME or MUTE.
10 If the code does not work, repeats steps 3 through 9 with the next device code from the
insert. Try every code listed for your brand until one works for your device.
11 If you are unable to find a code that works, try Programming Using Device Codes Scan.
Programming Using Device Codes Scan
If the code for your device is not listed in the insert, use this procedure to scan the remote
control’s memory for the device code.
1 Turn the device on, using the device’s front panel buttons or its remote control.
2 Press and hold the mode button until all the other mode buttons light up, and then release
the button. The mode button flashes. For example, hold TV for a TV until all of the other
mode buttons light. When you let go, TV flashes.
1
2-3
4
5
6
7-8
Turn
device on
Press UP or
DOWN Arrow
until device
turns off
Press & hold
Mode button
until all Mode
buttons light up
Turn device back
on and test to
make sure code
works
Press
POWER
Press
POUND
DVD
DVD