User Guide

6
Making 21.0 UHF Remote
Work with Receiver
Verify the UHF antenna
is installed on the back
of the receiver.
Turn your receiver and
TV on, and press
SYSTEM INFO on the
front of the receiver.
Confi rm that you
see the System
Info screen.
Press RECORD on
your remote. The remote
address will probably
change on the screen.
Confi rm that your remote
operates your receiver
by pressing remote
buttons.
3
2
1
4
5
For 21.0 UHF, TV1 or TV2
Use the following instructions if you
have confi gured your remote to use
UHF signals for either TV1 or TV2.
Note: Use these instructions if your
receiver does not support System Wizard.
RECORD
1
1