User Guide

28
VCR MODE BUTTON
You must first set up the remote to control the VCR or DVD player.
See Setting Up to Control Other Devices on page 11. Then press the
VCR mode button to set the remote to VCR mode. The VCR mode
button will stay lit for two seconds to show you’ve set the remote to
VCR mode. Make sure you keep the remote in VCR mode to use the
buttons we tell you about here.
You must put the remote in VCR mode to set it up to control a DVD
player. Put the remote in VCR mode to use it to control a DVD player
.
TV/VIDEO BUTTON
Use this button to switch the VCR between its TV mode and its VCR
mode (see your VCR user’s manual for information).
POWER BUTTON
Press the blank POWER button to turn the VCR on or off. Press the
TV POWER button to turn the TV on or off.
UP/DOWN ARROW BUTTONS
Use these buttons to change channels on the VCR.
Note: If you are using the remote control in Limited Mode, the VCR
will not change channels.
VIEW TV BUTTON
For VCR/DVD combinations only: Press the VIEW TV button to
switch between VCR and DVD functions.
Pyramid.book Page 28 Wednesday, February 16, 2005 4:00 PM