Safety Instructions
Before you start...
Connect your airtv 3
Place your HD antenna in the best location for receiving
the most and strongest local signals. You don’t need to
permanently mount your antenna just yet, as you may
need to adjust it later for optimal performance.
You can get the best reception from your antenna by
following these tips:
Try a window rst
Higher is better
Point it toward your broadcast towers
For more tips and information on the ideal placement for your type of
antenna, visit airtv.net/OTA.
1
2
3
Connect to antenna
Connect an HD antenna to
your airtv 3 using a
coaxial cable.
Connect to Internet
Connect your own Ethernet
cable from your router or
modem. For WiFi, you will
connect your airtv 3 to
your network by using the
Sling app on your mobile
device in the next step.
Connect to power
Connect the power cable
and the Power light on the
front of the unit will blink.
Other lights may blink as
well, which is normal.
Need to start over?
If you need to restart the installation process while conguring your airtv,
push the end of a paper clip into the RESET port for 12 seconds (until the
front panel lights blink twice) to factory-reset the unit.